Smi-1110-S2St70 Media Convertr, Perle Systems, Mfr#: 05070704

Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet

0.9 in

5.7 in

6.9 in

1.59 lb

SMI-1110-S2ST70 Media Converter

Yes

1000Base-T, 1000Base-ZX, 10/100/1000Base-T

Transceiver/Media Converter

2

1

Yes

Rail-mountable, Wall Mountable, Rack-mountable, External

SMI-1110-S2ST70 Media Converter, Universal AC/DC Adapter

2

Yes

43.50 Mile

5% to 90% non-condensing

14

UL 60950-1

100 (Default); 10

Full (Default); Half

100-240v AC, regulated DC adapter included

RS232 Serial RJ45 - Cisco pinout for use with standard CAT5

EN55024

5.5mm x 9.5mm x 2.1mm barrel socket

minimum range of -25 C to 70 C (-13 F to 158 F)

This green LED is operational only when power is applied. The LED is on when the 10/100/1000Base-T link is operatinal in full duplex mode. The LED is off when in half duplex.

Recessed pinhole button resets module

This multi-color LED is operational only when power is applied. The LED is green when the speed of the copper ethernet port is running at 1000 Mbps. The LED is orange when the speed of the copper Ethernet port is running at 100 Mbps. The LED is off when in 10 Mbps.

If Auto-Negotiation (802.3u) is enabled, the media converter determines the current cable pinout to use on the copper interface. If Auto-Negotiation (802.3u) is disabled the Media converter will use the RX Energy method on the copper interface to set the port MDI or MDIX whichever is appropriate; Enabled (Default)- Either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable; Disabled- If the partner device on the other end of the cable does not have the Auto-MDIX feature a specific cable, either a straight-through or crossover will be required to ensure that the media converter's transmitter and the partner devices transmitter are connected to the others receiver. The Media converter's 100Base-TX port is configured as MDI-X with this switch setting.

Green - 1000 Mbps link; Yellow - 100 Mbps link; Off - 10 Mbps or no Link

1000 Kbits frame buffer memory

0 C to 50 C (32 F to 122 F)

Up to 3,048 meters (10,000 feet)

FCC Part 15 Class A, EN55022 Class A

This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.

This green LED is operational only when power is applied. The LED is on when the 1000Base-X link is on and flashes with a 50% duty cycle when data is received.

EN 60825-1:2007

This green LED is operational only when power is applied. The LED is on when the 10/100/1000Base-T link is on and flashes with a 50% duty cycle when data is received.

0.34amps at 12vdc

1024 MAC Addresses

Red alarm indicator activated when an alert event occurs

The media converter can perform a loopback on the 1000Base-X fiber interface; Disabled (Default - Up); Enabled- The 1000Base-X receiver is looped to the 1000Base-X transmitter. The copper transmitter is taken off the interface.

Green indicator indicating an active Ethernet link. Blinking indicates RX and TX of data

Blinking green during startup cycle; Steady green: module has power and is ready; Red : error

4.1watts

( 12 vDC Nominal )

Full (Default); Half

The Fiber Fault Alert switch has meaning when Auto-Negotiation is disabled; Enabled (Default - Up); When the 1000Base-X receiver is off the 1000Base-X transmitter is turned off. Periodically the 1000Base-X receiver will be turned on for a short period to allow the condition to clear if the 1000Base-X link partner is using a similar feature; Disabled (Down)

This green LED is operational only when power is applied. The LED is on when the 10/100/1000Base-X link is operatinal in full duplex mode. The LED is off when in half duplex.

5% to 95% non-condensing

10/100/1000Base-T - RJ45; Auto- MDI/MDIX; Single mode dual ST Media Converter

175 x 145 x 23 mm

RJ45 connector; 2 pair CAT5, EIA/TIA 568A/B or better cable for 10/100; 4 pair CAT5 UTP cable for Gigabit; Magnetic Isolation1.5kv

Enabled (Default)- The media converter uses 802.3u Auto-negotiation on the 10/100/1000Base-T interface. It is set to advertise full duplex, half duplex, pause and remote fault capabilities; Disabled- The media converter sets the port according to the position of the speed and duplex switches.

Canada

1