Temp. Range
-40 Degrees to 250 Degrees F
Dynamic Load Capacity
19,000 lb
Static Load Capacity
22,500 lb
Includes
Expansion M2000 Spherical Roller Bearing
Bearing Insert Type
Spherical Roller
Bearing Housing Material Type
Cast Iron
Bearing Lubrication
Lithium Complex Grease
Shaft Locking Type
Set Screws
Bolt Hole Center-to-Center
6 9/16 in
Mounting Surface to Shaft Center
2 1/4 in
Bearing Insert Material
Alloy Steel
Housing Material
Cast Iron
Maximum Temperature
250 Degrees F
Features
+/-11/2 Degrees Misalignment Capacity, Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Skf(TM) and Timken(TM) Spherical Roller Bearings, Expansion Units have .100 in Capacity, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction, Single Piece Outer Race is Grooved and has 3 Lube Holes for Even Distribution of Grease), Standard Units have One Locking Collar, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees , will Accommodate Moderate Thrust Loads and Permits Angular Misalignment without Loss of Capacity
Included Bearing
Expansion M2000 Spherical Roller
Bearing Material Grade
52100
Static Radial Load Capacity
22,500 lbf
Dynamic Axial Load Capacity
19,000 lbf
Mount Hole Center-to-Center Length
6.25 in
Minimum Temperature
-40 Degrees F
Application
Air Handling, Conveying, Food Processing, Paper and Forestry, Screening
Lubricant Material
Lithium Grease
System of Measurement
Inch
Maximum Misalignment Angle
5.5 Degrees
Country of Origin (subject to change)
United States
