Bearing Insert Type
Tapered Roller
Shaft Locking Type
Set Screws
Bearing Housing Material Type
Ductile Iron
Bearing Insert Material
Alloy Steel
Bolt Hole Center-to-Center
9 in
Mounting Surface to Shaft Center
3 1/8 in
Housing Material
Ductile Iron
Temp. Range
-40 Degrees to 250 Degrees F
Static Load Capacity
61,200 lb
Includes
Non-Expansion Timken Type E Tapered Roller Bearing
Bearing Lubrication
Timken Lithium Complex Grease
Dynamic Load Capacity
12,300 lb
Minimum Temperature
-40 Degrees F
Application
Aggregate and Cement, Air Handling, Baggage Handling, Food Processing, Mining, Paper and Forestry
Maximum Misalignment Angle
4 Degrees
Bearing Material Grade
52100
System of Measurement
Inch
Dynamic Axial Load Capacity
12,300 lbf
Mount Hole Center-to-Center Length
9 in
Static Radial Load Capacity
61,200 lbf
Mount Hole Size
1 13/16 in
Load Direction
Radial, Thrust
Maximum Temperature
250 Degrees F
Lubricant Material
Lithium Complex Grease
Included Bearing
Non-Expansion Timken Type E Tapered Roller
Features
+/-4 Degrees Misalignment Capacity, Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Timken (TM) Enhanced Dee Tapered Roller Bearings with the Highest Industry Load Ratings, Double-Extended Inner Race, Case Hardened Rollers and Races, Dimensionally Interchangeable with Comparable Type E Units, Moline Split E1000, Moline ME2000 and ME3000, Extended Inner Race has Two Locking Collars with 65 Degrees Set Screw Spacing, Replaceable Solid Cartridge Assembly for Easy Maintenance, Standard V-Guard(TM) Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal, Steel Cartridge is Black Oxide Coated for Corrosion Protection, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees
Split Housing
Split Horizontally
Country of Origin (subject to change)
United States
