Includes
Non-Expansion M2000 Spherical Roller Bearing
Static Load Capacity
26,500 lb
Dynamic Load Capacity
22,400 lb
Temp. Range
-40 Degrees to 250 Degrees F
Bearing Housing Material Type
Cast Iron
Bearing Insert Type
Spherical Roller
Mounting Surface to Shaft Center
2 1/2 in
Bearing Lubrication
Lithium Complex Grease
Bolt Hole Center-to-Center
7 1/16 in
Shaft Locking Type
Set Screws
Bearing Insert Material
Alloy Steel
Dynamic Axial Load Capacity
22,400 lbf
Minimum Temperature
-40 Degrees F
Lubricant Material
Lithium Grease
Features
+/-11/2 Degrees Misalignment Capacity, Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Skf(TM) and Timken(TM) Spherical Roller Bearings, Expansion Units have .100 in Capacity, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction, Single Piece Outer Race is Grooved and has 3 Lube Holes for Even Distribution of Grease), Standard Units have One Locking Collar, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees , will Accommodate Moderate Thrust Loads and Permits Angular Misalignment without Loss of Capacity
Bearing Material Grade
52100
Included Bearing
Non-Expansion M2000 Spherical Roller
Maximum Misalignment Angle
5.5 Degrees
Mount Hole Center-to-Center Length
6.75 in
Application
Air Handling, Conveying, Food Processing, Paper and Forestry, Screening
Static Radial Load Capacity
26,500 lbf
Housing Material
Cast Iron
Maximum Temperature
250 Degrees F
System of Measurement
Inch
Country of Origin (subject to change)
United States