14 AWG 2 Conductor Nonmetallic Building Cable 600V WT, Romex, Mfr#: 28827422

14 AWG

2 with Bare CU Ground

50 ft

White

PVC

Nonmetallic Building Cable

50 ft.

NM-B

Solid

0.360 in x 0.162 in

14 AWG

14 AWG

NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not subject to excessive moisture or dampness.

UL 83, UL standard 719. Federal Specification A-A-59544 and requirements of National Electrical Code

Bare/Black/White

PVC

15

194 Degrees F

600 V

Nonmetallic Building Cable

PVC

NM-B

NM-B

Solid

Coil

PVC

50 ft

ConstructionSouthwire Romex® Brand SIMpull® NM-B cable is manufactured as 2, 3, or 4 conductor cable, with a bare ground wire. Copper conductors are annealed (soft)copper. Stranded conductors are compressed stranded. Conductor insulation is 90°C-rated polyvinyl chloride (PVC), nylon jacketed. Romex® Brand SIMpull® NM-B cable is designed for easier pulling, resulting in easier installation. The cable jacket is color-coded for quick size identification; White - 14 AWG, Yellow - 12 AWG, Orange - 10 AWG, and Black - 8 AWG and 6 AWG.

2

15

170mils

1

1

372mils

ApplicationSouthwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

15mils

14 AWG

14

United States

1