Shaft Locking Type - Couplings
1 Piece Set Screw
Item
Motion Control Coupling
System of Measurement
Inch
Bore Dia.
1/4 in x 3/16 in
Material - Couplings
Stainless Steel
Item - Motion Control Couplings
Motion Control Coupling
Length through Bore (In.)
0.386
Length through Bore (mm)
9.8
Max. Temp. Range (F)
350 Degrees
Setscrew Location
2 (120 Degrees )
Outside Dia. (In.)
0.750 in
Max. Angular Misalignment
3 Degrees
Max. Parallel Misalignment (In.)
0.008 in
Length through Bore
0.386 in
Max. Axial Misalignment (In.)
+/-0.005
Torsional Stiffness (Deg./In.-Lbs.)
0.179
Clearance Dia. (In.)
1.25 in
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
Bore Tolerance
+0.001/-0.000 in
Screw Material
Alloy Steel
Length Through Bore 1
0.4 in
Dynamic Torque Reversing
4.75 lb-in
Minimum Operating Temperature
-40 Degrees F
Angular Misalignment
3 Degrees
Number of Locking Screws
2
Parallel Misalignment
0.008 in
Maximum Operating Temperature
350 Degrees F
Included Screws
(2) Set Screw
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Moment of Inertia
0.007 lb-in sq
Fastener Tightening Torque
1.76 N-m
Shaft Locking Type
Set Screw
Coupling Material Finish
Bright
Coupling Material
Stainless Steel
Length Through Bore 2
0.4 in
Coupling Outside Diameter
3/4 in
Screw Material Finish
Black Oxide
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash
Shaft Tolerance
+0.0000/-0.0005 in
Full Bearing Support Required
Yes
Torsional Stiffness
5.59 in-lb/Deg
For Misalignment Type
Angular, Axial, Parallel
Dynamic Torque Non-Reversing
9.5 lb-in
Coupling Material Grade
303
Country of Origin (subject to change)
United States