Shaft Locking Type - Couplings
1 Piece Set Screw
Item
Motion Control Coupling
System of Measurement
Metric
Material - Couplings
Aluminum
Length through Bore
17.02 mm
Item - Motion Control Couplings
Motion Control Coupling
Max. Temp. Range (F)
225 Degrees
Clearance Dia. (In.)
1.0 in
Max. Angular Misalignment
3 Degrees
Max. Parallel Misalignment (In.)
0.015 in
Max. Axial Misalignment (In.)
+/-0.01
Length through Bore (mm)
17.02
Setscrew Location
2 (120 Degrees )
Torsional Stiffness (Deg./In.-Lbs.)
0.07
Length through Bore (In.)
0.67
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
Bore Tolerance
+0.025/-0.000 mm
Screw Material
Alloy Steel
Screw Material Finish
Black Oxide
Full Bearing Support Required
Yes
Length Through Bore 2
17.6 mm
Angular Misalignment
3 Degrees
Dynamic Torque Reversing
1.7 N-m
Number of Locking Screws
4
Moment of Inertia
0.000006349 kgf/m sq
Coupling Material Grade
7075
Dynamic Torque Non-Reversing
3.39 N-m
Fastener Tightening Torque
4 N-m
Coupling Material
Aluminum
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Included Screws
(4) Set Screw
Coupling Material Finish
Bright
Shaft Tolerance
+0.000/-0.013 mm
Maximum Operating Temperature
107 Degrees C
Torsional Stiffness
1.61 N-m/Deg
Shaft Locking Type
Set Screw
For Misalignment Type
Angular, Axial, Parallel
Parallel Misalignment
0.38 mm
Length Through Bore 1
17.6 mm
Coupling Outside Diameter
28.6 mm
Minimum Operating Temperature
-40 Degrees C
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash
Country of Origin (subject to change)
United States