Item
Motion Control Coupling
Shaft Locking Type - Couplings
1 Piece Set Screw
System of Measurement
Metric
Material - Couplings
Aluminum
Clearance Dia. (In.)
0.75 in
Max. Temp. Range (F)
225 Degrees
Max. Angular Misalignment
3 Degrees
Max. Axial Misalignment (In.)
+/-0.01
Item - Motion Control Couplings
Motion Control Coupling
Length through Bore
17.02 mm
Torsional Stiffness (Deg./In.-Lbs.)
0.221
Setscrew Location
2 (120 Degrees )
Max. Parallel Misalignment (In.)
0.015 in
Length through Bore (In.)
0.67
Length through Bore (mm)
17.02
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
Screw Material
Alloy Steel
Bore Tolerance
+0.025/-0.000 mm
Coupling Outside Diameter
28.6 mm
For Misalignment Type
Angular, Axial, Parallel
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash
Number of Locking Screws
4
Dynamic Torque Reversing
0.96 N-m
Length Through Bore 2
17.6 mm
Minimum Operating Temperature
-40 Degrees C
Coupling Material Grade
7075
Length Through Bore 1
17.6 mm
Torsional Stiffness
0.51 N-m/Deg
Parallel Misalignment
0.38 mm
Angular Misalignment
3 Degrees
Shaft Tolerance
+0.000/-0.013 mm
Fastener Tightening Torque
4 N-m
Full Bearing Support Required
Yes
Moment of Inertia
0.000006349 kgf/m sq
Maximum Operating Temperature
107 Degrees C
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Shaft Locking Type
Set Screw
Dynamic Torque Non-Reversing
1.92 N-m
Included Screws
(4) Set Screw
Coupling Material Finish
Bright
Screw Material Finish
Black Oxide
Coupling Material
Aluminum
Country of Origin (subject to change)
United States
