Shaft Locking Type - Couplings
1 Piece Set Screw
Item
Motion Control Coupling
System of Measurement
Metric
Material - Couplings
Stainless Steel
Length through Bore
11.43 mm
Overall Length (In.)
1.063
Length through Bore (mm)
11.43
Max. Axial Misalignment (In.)
+/-0.005
Max. Angular Misalignment
3 Degrees
Length through Bore (In.)
0.45
Torsional Stiffness (Deg./In.-Lbs.)
0.134
Max. Temp. Range (F)
350 Degrees
Max. Parallel Misalignment (In.)
0.008 in
Clearance Dia. (In.)
1.125 in
Setscrew Location
2 (120 Degrees )
Item - Motion Control Couplings
Motion Control Coupling
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
Screw Material
Alloy Steel
Bore Tolerance
+0.025/-0.000 mm
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Shaft Tolerance
+0.000/-0.013 mm
Included Screws
(4) Set Screw
Coupling Material Finish
Bright
Shaft Locking Type
Set Screw
Minimum Operating Temperature
-40 Degrees C
Fastener Tightening Torque
1.76 N-m
Number of Locking Screws
4
Dynamic Torque Reversing
0.62 N-m
Coupling Material
Stainless Steel
Full Bearing Support Required
Yes
Coupling Material Grade
303
Coupling Outside Diameter
22.2 mm
Dynamic Torque Non-Reversing
1.25 N-m
Length Through Bore 2
12.7 mm
Torsional Stiffness
0.84 N-m/Deg
Moment of Inertia
0.000004594 kgf/m sq
Length Through Bore 1
12.7 mm
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash
Maximum Operating Temperature
176 Degrees C
For Misalignment Type
Angular, Axial, Parallel
Parallel Misalignment
0.2 mm
Screw Material Finish
Black Oxide
Angular Misalignment
3 Degrees
Country of Origin (subject to change)
United States
