Shaft Locking Type - Couplings
1 Piece Set Screw
Material - Couplings
Aluminum
Length through Bore
11.45 mm
Max. Angular Misalignment
3 Degrees
Torsional Stiffness (Deg./In.-Lbs.)
0.33
Item
Motion Control Coupling
Length through Bore (mm)
11.45
Max. Axial Misalignment (In.)
+/-0.005
Item - Motion Control Couplings
Motion Control Coupling
Length through Bore (In.)
0.450
Max. Parallel Misalignment (In.)
0.008 in
Bore Tolerance
+0.025/-0.000 mm
Moment of Inertia
0.000000731 kgf/m sq
Dynamic Torque Reversing
0.4 N-m
Screw Material
Alloy Steel
Dynamic Torque Non-Reversing
0.79 N-m
Coupling Material Finish
Bright
Full Bearing Support Required
Yes
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Coupling Material
Aluminum
Coupling Material Grade
7075
Fastener Tightening Torque
1.76 N-m
Angular Misalignment
3 Degrees
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
For Misalignment Type
Angular, Axial, Parallel
Length Through Bore 1
10.7 mm
Included Screws
(2) Set Screw
System of Measurement
Metric
Screw Material Finish
Black Oxide
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash
Number of Locking Screws
2
Length Through Bore 2
10.7 mm
Coupling Outside Diameter
19.1 mm
Minimum Operating Temperature
-40 Degrees C
Shaft Locking Type
Set Screw
Shaft Tolerance
+0.000/-0.013 mm
Parallel Misalignment
0.2 mm
Maximum Operating Temperature
107 Degrees C
Torsional Stiffness
0.34 N-m/Deg
Country of Origin (subject to change)
United States
