Item - Relay
Enclosed Power Relay
DC Contact Rating - Relay
20A @ 28V
AC Contact Rating - Relay
30A @ 277V
Contact Form - Relay
DPST-NO
Mounting - Relay
Bottom Flange, DIN Rail
Power Consumption - Relay
4.0 W
Contact Material
Silver Tin Oxide
Electrical Connection - Power Relay
1/4 in Tab Terminal
Mounting
Flange, Bottom/Din Rail
Body Depth - Relay
2.68 in
Standards
CE Certified, CSA C22.2 No 14, EN/IEC 61810-1, GOST, UL 508
Features
Sealed Construction
Electrical Connection
1/4 in Tab Terminal
Body Width - Relay
1.34 in
Contact Amp Rating (Resistive)
30A @ 277VAC, 20A @ 28VDC
Body Height - Relay
1.65 in
Overall Height - Relay
1.54 in
Series
Harmony(TM) RPF Power Series
Mechanical Operating Durability
5,000,000
Mounting Style
DIN Rail u0026 Top Flange
Dielectric Strength
1,500V AC Between Contacts with Micro Disconnection, 2,000V AC Between Poles with Basic, 4,000V AC Between Coil and Contact with Reinforced
Contact Rating (AC)
30 A @ 250/277V (NO)
Operating Current
20 A at 28V DC (NO UL), 25 A at 28V DC (NO IEC), 30 A at 250V AC (NO IEC), 30 A at 77V AC (NO UL)
For Use With
Hard-Wired Logic Automated Systems
Electrical Operating Durability
100,000
Resistance Properties
Shock-Resistant, Vibration-Resistant
Contact Rating (DC)
20 A @ 28V (NO), 25 A @ 28V (NO)
Minimum Operating Temperature
-40 Degrees F
Input Voltage
19.2 to 26.4V
Maximum Switching Voltage
250V AC
Push-To-Test Method
No Button
Maximum Operating Temperature
131 Degrees F
Coil Resistance
350 Ohm at 20°C +/- 10 %
Operating Temp. Range
-40-55°C
Mounting Type
DIN rail || panel
Switching Voltage
250 V IEC
Dielectric Voltage
2000 V AC between poles with basic || 4000 V AC between coil and contact with reinforced || 1500 V AC between contacts with micro disconnection
Mounting Support
DIN rail; Panel
Rated Impulse Withstand Voltage
4 kV 1.2/50 µs
Control Circuit Voltage Limits
19.2 to 26.4 V
Ambient Air Temperature For Operation
-40 to 131°F (-40 to 55°C)
Control Type
Without lockable test button
Control Circuit Voltage
24 V DC
Contact Type and Composition
2 NO
Vibration Resistance
3 gn +/- 1 mm 10 to 150 Hz)5 cycles in operation; 10 gn +/- 1 mm 10 to 150 Hz)5 cycles not operating
Operating Rate
Less than or Equal to 1200 cycles/hour under load; Less than or Equal to 18000 cycles/hour no-load
Conventional Enclosed Thermal Current
25 A -40 to 131°F (-40 to 55°C) relays side by side without a gap; 30 A -40 to 131°F (-40 to 55°C) 13 mm gap between two relays
Rated Operational Current
30 A 277 V AC) NO UL; 20 A 28 V DC) NO UL; 30 A 250 V AC) NO IEC; 25 A 28 V DC) NO IEC
Device Presentation
Complete product
Shock Resistance
10 gnin operation; 30 gnnot operating
Operating Position
Any position
Average Resistance
350 Ohm at 68°F (20°C) +/- 10%
Maximum Switching Capacity
7500 VA/700 W
Test Levels
Level A group mounting
Resistive Rated Load
25 A 28 V DC; 30 A 250 V AC
Utilisation Coefficient
0.1
Electrical Durability
100000 cycles resistive
Ambient Air Temperature For Storage
-40 to 185°F (-40 to 85°C)
Product Or Component Type
DIN rail/panel mount relay
IP Degree Of Protection
IP40 conforming to IEC 60529
Minimum Recommended Switching Capacity
6000 mW 500 mA / 12 V NO
Product Certifications
CSA; CE; GOST; UL
Drop-Out Voltage Threshold
Greater than or Equal to 0.1 Uc
Rated Insulation Voltage
250 V IEC; 300 V UL
Mechanical Durability
5000000 cycles
Country of Origin (subject to change)
China
