Item - Relay
Current Sensing Relay
Input Voltage
Current Sensing Relay
Response Time
u003c 200 ms (in the event of a fault)
Input Current
100000 mA permanent at 25°C || 300000 mA non repetitive u003c 3 s at 25°C
Relay Monitored Parameters
overcurrent detection
Immunity To Microbreaks
10 ms
Connections - Terminals
screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
Local Signalling
for power ON LED (green) || for relay ON LED (yellow)
Maximum Measuring Cycle
30 ms measurement cycle as true rms value
Dielectric Test Voltage
2 kV AC 50 Hz
Marking
CE : 73/23/EEC || CE : EMC 89/336/EEC
Mechanical Durability
30000000 cycles
Maximum Power Consumption In Va
3 VA
Hysteresis
15-15 % fixed threshold setting
Supply Voltage Limits
20.4-264 V AC/DC
Ip Degree Of Protection
IP20 IEC 60529 terminals) || IP30 IEC 60529 casing)
Relay Type
current control relay
Vibration Resistance
0.35 mm 5-57.6 Hz)IEC 60068-2-6 || 1 gn 57.6-150 Hz)IEC 60255-21-1
Contacts Type And Composition
1 C/O
Switching Capacity In Va
1250 VA
Non-Dissipating Shock Wave
4 kV
Run-Up Delay At Power-Up
0.5 s
Control Circuit Frequency
40...70 Hz sinusoidal
Threshold Setting
10...100 %
Maximum Power Consumption In W
1 W
Overvoltage Category
III IEC 60664-1
[Us] Rated Supply Voltage
24...240 V AC/DC 50/60 Hz +/- 10 %
Operating Rate
u003c= 360 operations/hour full load
Ambient Air Temperature For Storage
-40-70°C
Pollution Degree
3 IEC 60664-1
Mounting Support
35 mm symmetrical DIN rail conforming to EN/IEC 60715
Contacts Material
cadmium free
Maximum Switching Voltage
250 V AC/DC
Insulation
between supply and measurement
Shock Resistance
15 gn 11 ms IEC 60255-21-1
Measurement Range
2...20 A current
Minimum Switching Current
10 mA 5 V DC
Insulation Resistance
u003e 500 MOhm 500 V DC IEC 60255-5 || u003e 500 MOhm 500 V DC IEC 60664-1
Tightening Torque
0.6-1 N.m IEC 60947-1
Relative Humidity
95-95 % 55-55°C IEC 60068-2-30
[Ui] Rated Insulation Voltage
400 V IEC 60664-1
Measurement Accuracy
+/- 10 % of the full scale value
Product Certifications
GL || C-tick || GOST || UL || CSA
Ambient Air Temperature For Operation
-20-50°C
Measurement Error
+/- 0.05 %/°C with temperature variation || u003c 1 % over the whole range with voltage variation
Control Circuit Voltage Limits
15 % + 10 % Un
Electromagnetic Compatibility
emission standard for industrial environments EN/IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments EN/IEC 61000-6-3 || immunity for industrial environments NF EN/IEC 61000-6-2
Housing Material
self-extinguishing plastic
Product Or Component Type
current control relay
Repeat Accuracy
+/- 0.5 % input and measurement circuit
Electrical Durability
100000 cycles
Operating Position
any position without derating
Utilisation Category
AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || DC-14 IEC 60947-5-1
Control Type
without test button
Range of Product
Harmony Control Relays
Country of Origin (subject to change)
Indonesia
