Head and Fitting Material - Pumps
Polycarbonate/Polypropylene/PVC
Includes
20 ft Roll of Suction/Discharge Tubing, Pump Tube, Injection Check Valve 100 psi (6.9 bar) Maximum or 1 Injection Fitting 25 psi (1.7 bar) max, Mounting Bracket, Weighted Suction Line Strainer, (2) Additional Latches, (3) Connecting Nuts, (3) 1/4 in Ferrules
Chemical Metering Pump Type
Peristaltic
Item
Chemical Metering Pump
Max. Flow (gpd) - Pumps
50.00 gpd
Tubing Material
Santoprene
Max. Viscosity - Pumps
1,500 cps
Tubing Material - Peristaltic Pumps
Santoprene
Reproducibility - Pumps
+/-2.0%
Standards
cCSAus, CE Certified, cUSA, ETL Intertek Conforms to ANSI/NSF Std.50, UL Listed
Features
Fixed Rate Single Head, Nonclogging Design, Valveless
Flow Rate Output Control
Fixed
Max. Pressure - Pumps
25 psi
Item - Chemical Metering Pumps
Chemical Metering Pump
Body Material
Polycarbonate
Seals and O-Rings - Pumps
Santoprene
Number of Feeds
Single Head
Max. Flow (GPD) - Pumps
50.00 gpd
Intake Connection Type
Tube
Motor Mounting Type
Not Applicable
Degassing Valve Included
No
Flow Rate (Maximum)
50 gpd
Horsepower (Maximum)
1/30 hp
Discharge Connection Type
Tube
Discharge Connection Size
1/4 in
Electrical Connection Type
Plug-In
Media Temperature (Maximum)
125 Degrees F
Flow Rate (Minimum)
Not Applicable
Viscosity (Maximum)
1,500 cps
Chemical Compatibility
Ammonium Hydroxide, Antifreeze, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Phosphoric Acid 100%, Phosphoric Acid 40%, Phosphoric Acid 50%, Phosphoric Acid 60%, Phosphoric Acid 70%, Phosphoric Acid 80%, Phosphoric Acid 90%, Potassium Hydroxide 50%, Sodium Hydroxide 20%, Sodium Hypochlorite 10%, Sodium Hypochlorite 5%, Sulfuric Acid 10%, Sulfuric Acid 20%, Sulfuric Acid 30%, Sulfuric Acid 40%, Water
Motor Speed (Maximum)
26 RPM
Ambient Temperature (Maximum)
125 Degrees F
Control Programs
Manual Control
Metering Reproducibility
+/-2.0%
Max. Discharge Pressure
25 psi
Turn Down Ratio
Not Applicable
Head Material
Polyethylene, Polypropylene
Housing Material
Polycarbonate
Media Temperature (Minimum)
32 Degrees F
Fitting Material
Polypropylene, PVC
Media Temp. Range
32 Degrees F to 125 Degrees F
Intake Connection Size
1/4 in
Roller Material
Polyethylene
Country of Origin (subject to change)
United States
